![reclaime raid recovery sitting at 100% vhd reclaime raid recovery sitting at 100% vhd](http://www.reclaime-pro.com/Images/manual/ReclaiMe-Pro-RAID-recovery-progress.png)
- #Reclaime raid recovery sitting at 100% vhd how to
- #Reclaime raid recovery sitting at 100% vhd series
![reclaime raid recovery sitting at 100% vhd reclaime raid recovery sitting at 100% vhd](https://cdn.diskinternals.com/media/en/products/partition-recovery/raw-min.png)
My situation was slightly different, so I add this comment. Repairing a failed RAID0 laptop single disk… Now you can attach the VHD or VHDX in Disk Management in Windows, through right clicking “Disk Management” and “Attach VHD”. I was using a network disk through \\server\share which was convenient. Choose the type of image you want to save the disk in.
#Reclaime raid recovery sitting at 100% vhd how to
The program will try to find the pattern by reading both disks, and eventually come up with options to how to save the data.Ħ. Select both RAID 0 disks, now showing as single disks in the Device Manager and inside the Free Raid Recovery program.ĥ. Do not initialize any of them if prompted.ģ. You will now find the disks as single disks, of course. Set both disks in the RAID 0 to non-members in the Intel boot-menu. VHD image using “Free RAID 0 Recovery” like this: HOWEVER: I was able to recover all the data making a. My guess is that one of the disks are partially defective. I experienced a loooong wait (maybe 15-20 sec) on doing any type of action in the Intel Boot-RAID menu at POST. I’ve gone through the instructions, but one of my Intel SSD’s seemed to never properly “detach” from the RAID in the Intel menu. If it is your boot volume, some alternative steps for the Windows portion will need to be found. This guide only works if the RAID that has failed is NOT your primary boot volume. – Recover partition information and reboot – Re-create RAID disks with exact previous settings Step wise we are going to do the following:
#Reclaime raid recovery sitting at 100% vhd series
I will highlight how to fix it in a series of screenshots below. But in reality, nothing is wrong with it. When you then go through the normal POST and it tries to run an operating system, for some reason it screws up one of the RAID0 sets. So I started investigating and I found a way to repair the situation without data loss.Īfter reading up on this problem (and finding a few helpful blogs, but mostly a lot of other people having the same problem) I was able to puzzle together a way to actually repair the failed RAID0 stipe and get it back again as it was before it “failed”.Īfter doing some testing it turns out that when my BIOS resets itself it puts the controller back in AHCI mode. This was strange to me (I have a background in Storage) as there was no reason why the RAID would have failed.